Frigidaire Refrigerator Error Code E24
Frigidaire refrigerator error code E24: The control detected a defrost drain pump fault or restricted condensate flow.
Methodology: Reviewed against official Frigidaire refrigerator support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
- Frigidaire Owner Center - Refrigerator support — Official Frigidaire owner support entry point used to confirm refrigerator support and troubleshooting guidance.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
What Does Error E24 Mean on Your Frigidaire Refrigerator?
Frigidaire refrigerator error code E24: The control detected a defrost drain pump fault or restricted condensate flow.
What typically fails: Defrost drain / drain pan / condensate pump
What You're Probably Seeing
- → Water appears under the refrigerator or inside the fresh-food section
- → Drain noises repeat without clearing the issue
- → Frost or ice returns after a short period of normal operation
Common Causes
- • Defrost heater or heater harness fault
- • Defrost thermistor or sensor reading out of range
- • Main control board not completing the defrost cycle
How to Fix It Yourself
- 1 Unplug the refrigerator and clear any ice or debris from the drain opening and tube
- 2 Check whether your model uses a small condensate pump and inspect its connector
- 3 Confirm the rear drain pan is seated correctly and not overflowing
- 4 Contact a technician if the code returns after the drain path is fully clear
More Frigidaire Refrigerator Codes
Was this page helpful?
Rate the helpfulness of this page
Thanks for the feedback!
Your input helps us improve this page.