Frigidaire Refrigerator Error Code E31
Frigidaire refrigerator error code E31: The control detected a sensor or feedback fault in the water or defrost monitoring circuit.
Methodology: Reviewed against official Frigidaire refrigerator support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
- Frigidaire Owner Center - Refrigerator support — Official Frigidaire owner support entry point used to confirm refrigerator support and troubleshooting guidance.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
What Does Error E31 Mean on Your Frigidaire Refrigerator?
Frigidaire refrigerator error code E31: The control detected a sensor or feedback fault in the water or defrost monitoring circuit.
What typically fails: Water-system sensor / harness / main control board
What You're Probably Seeing
- → Water or ice features work intermittently
- → The code appears after a reset even with normal cooling
- → The unit may pause water-related functions as a protective step
Common Causes
- • Defrost heater or heater harness fault
- • Defrost thermistor or sensor reading out of range
- • Main control board not completing the defrost cycle
What to Try First
- 1 Unplug the refrigerator before checking any harnesses or sensor connectors
- 2 Inspect accessible sensor wiring near the filter head, ice maker, or drain-monitor area
- 3 Reseat loose connectors and look for corrosion or pinched wires
- 4 Book service if sensor readings or board inputs need live testing
More Frigidaire Refrigerator Codes
Was this page helpful?
Rate the helpfulness of this page
Thanks for the feedback!
Your input helps us improve this page.