Frigidaire Refrigerator Error Code E35
Frigidaire refrigerator error code E35: The control detected an overfill or overflow condition in the water or ice-making system.
Methodology: Reviewed against official Frigidaire refrigerator support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
- Frigidaire Owner Center - Refrigerator support — Official Frigidaire owner support entry point used to confirm refrigerator support and troubleshooting guidance.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
What Does Error E35 Mean on Your Frigidaire Refrigerator?
Frigidaire refrigerator error code E35: The control detected an overfill or overflow condition in the water or ice-making system.
What typically fails: Water inlet valve / ice maker fill tube / water filter
What You're Probably Seeing
- → Ice maker overfills, clumps ice, or leaks into the bin
- → Water drips into the freezer or fresh-food section
- → The refrigerator may stop calling for water after the code appears
Common Causes
- • Loose connector between display and main control board
- • Control board communication fault
- • Moisture or corrosion at a harness connection
How to Fix It Yourself
- 1 Unplug the refrigerator and close the water supply valve before inspecting components
- 2 Check for a sticking inlet valve, blocked fill tube, or misaligned ice-maker fill cup
- 3 Replace an overdue water filter if flow is erratic or pressure is unstable
- 4 Have a technician test the valve and control timing if the overfill repeats
More Frigidaire Refrigerator Codes
Was this page helpful?
Rate the helpfulness of this page
Thanks for the feedback!
Your input helps us improve this page.