Frigidaire Refrigerator Error Code E45
Frigidaire refrigerator error code E45: The control detected a persistent fault in the refrigerator door sensing circuit.
Methodology: Reviewed against official Frigidaire refrigerator support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
- Frigidaire Owner Center - Refrigerator support — Official Frigidaire owner support entry point used to confirm refrigerator support and troubleshooting guidance.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
What Does Error E45 Mean on Your Frigidaire Refrigerator?
Frigidaire refrigerator error code E45: The control detected a persistent fault in the refrigerator door sensing circuit.
What typically fails: Door switch / door harness / main control board
What You're Probably Seeing
- → The door alarm or interior lights behave unpredictably
- → Cooling can suffer because the control thinks a door is open
- → The code reappears immediately after a restart
Common Causes
- • Loose connector between display and main control board
- • Control board communication fault
- • Moisture or corrosion at a harness connection
What to Try First
- 1 Unplug the refrigerator and inspect the door switch for sticking or damage
- 2 Check gasket contact and hinge alignment so the switch is fully engaged
- 3 Inspect accessible harness connections between the door switch and main control
- 4 Schedule service if the problem appears to be relay or control-board related
More Frigidaire Refrigerator Codes
Was this page helpful?
Rate the helpfulness of this page
Thanks for the feedback!
Your input helps us improve this page.