Frigidaire Refrigerator Error Code E57
Frigidaire refrigerator error code E57: The control detected overcurrent in a refrigerator fan motor circuit.
Methodology: Reviewed against official Frigidaire refrigerator support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.
Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.
- Frigidaire Owner Center - Refrigerator support — Official Frigidaire owner support entry point used to confirm refrigerator support and troubleshooting guidance.
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
What Does Error E57 Mean on Your Frigidaire Refrigerator?
Frigidaire refrigerator error code E57: The control detected overcurrent in a refrigerator fan motor circuit.
What typically fails: Evaporator fan motor / condenser fan motor / motor harness
What You're Probably Seeing
- → A fan hums loudly, stalls, or never reaches normal speed
- → Cooling becomes uneven between the freezer and fresh-food sections
- → The code reappears after the refrigerator tries to restart the fan
Common Causes
- • Fan blade obstructed by frost or debris
- • Fan motor winding or tachometer fault
- • Loose fan harness or control-board output issue
What to Try First
- 1 Unplug the refrigerator before inspecting the fan blade, motor, or wiring
- 2 Clear ice buildup or debris that is preventing the blade from turning freely
- 3 Inspect the motor harness and connector for heat damage or corrosion
- 4 Call for service if the fan motor or control board draws abnormal current
More Frigidaire Refrigerator Codes
Was this page helpful?
Rate the helpfulness of this page
Thanks for the feedback!
Your input helps us improve this page.