Frigidaire Washing Machine ⚠️ Stop Using

Frigidaire Washing Machine Error Code E5A

Frigidaire washer error code E5A: Overcurrent in heating circuit.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Frigidaire washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Frigidaire Owner Center - Washer support — Official Frigidaire owner support entry point used to confirm washer support and troubleshooting guidance.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Heating overcurrent can trip breakers or overheat wiring. Use cold-only cycles at most until the fault is diagnosed.

Can I fix it myself?

DIY Possible

Part: Heating element / heater harness / NTC sensor

How much will it cost?

DIY: $20–$100 (element or thermistor)

Technician: $100–$300

⏱ 30–60 min

What Does Error E5A Mean on Your Frigidaire Washing Machine?

Frigidaire washer error code E5A: Overcurrent in heating circuit.

What typically fails: Heating element / heater harness / NTC sensor

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Motor overloaded by a heavy or unbalanced load
• Motor control board or tachometer signal fault
• Loose harness, worn motor, or drive-system resistance

What to Try First

1 Stop the cycle and switch to a cold-only program if you need to remove a load
2 Unplug the washer before checking the heater, NTC sensor, and wiring harness for scorching or loose terminals
3 Replace a shorted heating element or damaged harness before running another hot wash
4 If the breaker trips with E5A, keep the washer disconnected and arrange service
5 Do not open live electrical panels or bypass safety devices

🛠️ You'll need: Multimeter, Screwdriver set, Nut driver · Time: 30–60 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Frigidaire Washing Machine error code E5A mean? ▼

Error code E5A on a Frigidaire Washing Machine means: Overcurrent in heating circuit. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Frigidaire Washing Machine error code E5A? ▼

Start by using only cold cycles and checking the heater, thermistor, and harness with power removed. If the fault returns or trips a breaker, the heating circuit needs service before the washer is used again.

Is it safe to use my Frigidaire Washing Machine with error code E5A? ▼

Only cold-only cycles are a reasonable short-term option. Stop using the washer completely if it trips the breaker or smells overheated.

More Frigidaire Washing Machine Codes

All Frigidaire washing machine error codes → All Frigidaire appliance codes →