GE Washing Machine ⚠️ Stop Using

GE Washing Machine Error Code rL

GE Washing Machine error code rL: Remove load — laundry detected in washer.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Ge washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

GE Appliances Support - Washer troubleshooting — Official GE Appliances washer troubleshooting and support guidance.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Stop using until the cause is identified. Check your owner's manual for model-specific guidance.

Can I fix it myself?

Technician Recommended

Part: See description above

How much will it cost?

DIY: Varies

Technician: $100–$500

⏱ 30–120 min

What Does Error rL Mean on Your GE Washing Machine?

GE Washing Machine error code rL: Remove load — laundry detected in washer.

What typically fails: See description above

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Door not fully latched or load preventing closure
• Door lock switch not reporting closed
• Latch, strike, or wiring fault in the door-lock circuit

What to Try First

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does GE Washing Machine error code rL mean? ▼

Error code rL on a GE Washing Machine means: Remove load — laundry detected in washer. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix GE Washing Machine error code rL? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error rL returns, the root cause (remove load — laundry detected in washer) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my GE Washing Machine with error code rL? ▼

It depends on the cause. Most rL errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More GE Washing Machine Codes

All GE washing machine error codes → All GE appliance codes →