LG Dishwasher ⚠️ Stop Using

LG Dishwasher Error Code nE

LG Dishwasher error code nE: Nozzle fault (specific models).

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Lg dishwasher support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

LG Support - Dishwasher troubleshooting — Official LG support library used for dishwasher error-code and troubleshooting references.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Stop using until the cause is identified. Check your owner's manual for model-specific guidance.

Can I fix it myself?

Technician Recommended

Part: See description above

How much will it cost?

DIY: Varies

Technician: $100–$500

⏱ 30–120 min

What Does Error nE Mean on Your LG Dishwasher?

LG Dishwasher error code nE: Nozzle fault (specific models).

What typically fails: See description above

What You're Probably Seeing

→ Error code on display
→ Cycle not completing
→ Machine stopping unexpectedly

Common Causes

• Door latch not fully engaging before cycle start
• Latch switch or strike misalignment
• Loose latch wiring or failed door-switch circuit

What to Try First

1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does LG Dishwasher error code nE mean? ▼

Error code nE on a LG Dishwasher means: Nozzle fault (specific models). The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix LG Dishwasher error code nE? ▼

First, unplug the dishwasher for 60 seconds to reset the control board. If error nE returns, the root cause (nozzle fault (specific models)) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my LG Dishwasher with error code nE? ▼

It depends on the cause. Most nE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More LG Dishwasher Codes

All LG dishwasher error codes → All LG appliance codes →