LG Dryer ⚠️ Stop Using

LG Dryer Error Code nP

LG Dryer error code nP: No power to dryer (cord / breaker).

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Lg dryer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

LG Support - Dryer troubleshooting — Official LG support library used for dryer error-code and troubleshooting references.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Stop using until the cause is identified. Check your owner's manual for model-specific guidance.

Can I fix it myself?

Technician Recommended

Part: See description above

How much will it cost?

DIY: Varies

Technician: $100–$500

⏱ 30–120 min

What Does Error nP Mean on Your LG Dryer?

LG Dryer error code nP: No power to dryer (cord / breaker).

What typically fails: See description above

What You're Probably Seeing

→ Error code displayed
→ Dryer not completing cycle
→ Clothes still wet after full cycle

Common Causes

• Door switch not reporting closed
• Door strike or latch misaligned
• Loose door-switch wiring or failed switch

What to Try First

1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does LG Dryer error code nP mean? ▼

Error code nP on a LG Dryer means: No power to dryer (cord / breaker). The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix LG Dryer error code nP? ▼

First, unplug the dryer for 60 seconds to reset the control board. If error nP returns, the root cause (no power to dryer (cord / breaker)) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my LG Dryer with error code nP? ▼

It depends on the cause. Most nP errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More LG Dryer Codes

All LG dryer error codes → All LG appliance codes →