LG Washing Machine ⚠️ Stop Using

LG Washing Machine Error Code CE

LG Washing Machine error code CE: Motor overcurrent error.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Lg washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

LG Support - Washer troubleshooting — Official LG support library used for washer error-code and troubleshooting references.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Caution — continued use without airflow causes overheating. Turn off until repaired.

Can I fix it myself?

Technician Recommended

Part: Fan motor / run capacitor

How much will it cost?

DIY: $30–$200 (motor or capacitor)

Technician: $150–$500

⏱ 45–90 min

What Does Error CE Mean on Your LG Washing Machine?

LG Washing Machine error code CE: Motor overcurrent error.

What typically fails: Fan motor / run capacitor

What You're Probably Seeing

→ Drum not spinning
→ Loud noise during spin
→ Machine vibrating excessively

Common Causes

• Door not fully latched or load preventing closure
• Door lock switch not reporting closed
• Latch, strike, or wiring fault in the door-lock circuit

What to Try First

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
3 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester · Time: 45–90 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does LG Washing Machine error code CE mean? ▼

Error code CE on a LG Washing Machine means: Motor overcurrent error. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix LG Washing Machine error code CE? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error CE returns, the root cause (motor overcurrent error) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my LG Washing Machine with error code CE? ▼

It depends on the cause. Most CE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More LG Washing Machine Codes

All LG washing machine error codes → All LG appliance codes →