Maytag Washing Machine ✅ Safe for Now

Maytag Washing Machine Error Code F0E2

Maytag Washing Machine error code F0E2: Lid opened during spin.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Maytag washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Maytag Product Help - Washer error codes and troubleshooting — Official Maytag Product Help entry point for washer error-code troubleshooting and owner-safe checks.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe — unit won't run with door open. A common and inexpensive fix.

Can I fix it myself?

DIY Possible

Part: Door latch / door lock assembly

How much will it cost?

DIY: $20–$100 (latch assembly)

Technician: $80–$200

⏱ 15–30 min

What Does Error F0E2 Mean on Your Maytag Washing Machine?

Maytag Washing Machine error code F0E2: Lid opened during spin.

What typically fails: Door latch / door lock assembly

What You're Probably Seeing

→ Cycle won't start
→ Door won't open after cycle
→ Error code on display

Common Causes

• Drain hose kinked, blocked, or installed too high
• Pump filter clogged with lint or debris
• Failed drain pump or loose drain-pump wiring

How to Fix It Yourself

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
3 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Screwdriver set, Putty knife · Time: 15–30 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Maytag Washing Machine error code F0E2 mean? ▼

Error code F0E2 on a Maytag Washing Machine means: Lid opened during spin. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Maytag Washing Machine error code F0E2? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error F0E2 returns, the root cause (lid opened during spin) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Maytag Washing Machine with error code F0E2? ▼

It depends on the cause. Most F0E2 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Maytag Washing Machine Codes

All Maytag washing machine error codes → All Maytag appliance codes →