Maytag Washing Machine ⚠️ Stop Using

Maytag Washing Machine Error Code F1E2

Maytag Washing Machine error code F1E2: Main control board error.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Maytag washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Maytag Product Help - Washer error codes and troubleshooting — Official Maytag Product Help entry point for washer error-code troubleshooting and owner-safe checks.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Safe to leave powered off. Do not attempt to repair circuit boards without electronics experience.

Can I fix it myself?

Technician Recommended

Part: Control board / PCB

How much will it cost?

DIY: $80–$300 (board replacement)

Technician: $200–$600

⏱ 30–90 min

What Does Error F1E2 Mean on Your Maytag Washing Machine?

Maytag Washing Machine error code F1E2: Main control board error.

What typically fails: Control board / PCB

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Drain hose kinked, blocked, or installed too high
• Pump filter clogged with lint or debris
• Failed drain pump or loose drain-pump wiring

What to Try First

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check all wiring harness connections to the main control board — reseat any loose connectors
3 If the board shows burn marks or damaged components, replacement is needed ($80–$300)
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Screwdriver set, Multimeter · Time: 30–90 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Maytag Washing Machine error code F1E2 mean? ▼

Error code F1E2 on a Maytag Washing Machine means: Main control board error. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Maytag Washing Machine error code F1E2? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error F1E2 returns, the root cause (main control board error) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Maytag Washing Machine with error code F1E2? ▼

It depends on the cause. Most F1E2 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Maytag Washing Machine Codes

All Maytag washing machine error codes → All Maytag appliance codes →