Samsung Dishwasher ⚠️ Stop Using

Samsung Dishwasher Error Code bE

Samsung Dishwasher error code bE: Button stuck on control panel.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Samsung dishwasher support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Dishwasher error codes and troubleshooting — Official Samsung support guidance for dishwasher error codes, drain, fill, leak, sensor, and heater troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Stop using until the cause is identified. Check your owner's manual for model-specific guidance.

Can I fix it myself?

Technician Recommended

Part: See description above

How much will it cost?

DIY: Varies

Technician: $100–$500

⏱ 30–120 min

What Does Error bE Mean on Your Samsung Dishwasher?

Samsung Dishwasher error code bE: Button stuck on control panel.

What typically fails: See description above

What You're Probably Seeing

→ Error code on display
→ Cycle not completing
→ Machine stopping unexpectedly

Common Causes

• Door latch not fully engaging before cycle start
• Latch switch or strike misalignment
• Loose latch wiring or failed door-switch circuit

What to Try First

1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check all wiring harness connections to the main control board — reseat any loose connectors
3 If the board shows burn marks or damaged components, replacement is needed ($80–$300)
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Dishwasher error code bE mean? ▼

Error code bE on a Samsung Dishwasher means: Button stuck on control panel. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Dishwasher error code bE? ▼

First, unplug the dishwasher for 60 seconds to reset the control board. If error bE returns, the root cause (button stuck on control panel) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Dishwasher with error code bE? ▼

It depends on the cause. Most bE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Dishwasher Codes

All Samsung dishwasher error codes → All Samsung appliance codes →