Samsung Dryer ✅ Safe for Now

Samsung Dryer Error Code hE3

Samsung Dryer error code hE3: Steam heater error.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Samsung dryer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Dryer error codes and troubleshooting — Official Samsung support guidance for dryer error codes, heating, venting, door, sensor, and power troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.

Can I fix it myself?

DIY Possible

Part: Heating element / thermal fuse / thermistor

How much will it cost?

DIY: $20–$100 (element or thermistor)

Technician: $100–$300

⏱ 30–60 min

What Does Error hE3 Mean on Your Samsung Dryer?

Samsung Dryer error code hE3: Steam heater error.

What typically fails: Heating element / thermal fuse / thermistor

What You're Probably Seeing

→ Clothes not drying
→ Dryer runs but no heat
→ Long dry times

Common Causes

• Heating element, gas valve, or heater relay not operating correctly
• Airflow restriction causing temperature readings outside expected range
• Thermistor, thermal fuse, or high-limit sensor fault

What to Try First

1 Unplug the dryer for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Test the heating element with a multimeter — replace if no continuity ($20–$80 part)
3 Check the thermal fuse — a blown fuse means there was overheating, also check the vent
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set, Nut driver · Time: 30–60 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Dryer error code hE3 mean? ▼

Error code hE3 on a Samsung Dryer means: Steam heater error. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Dryer error code hE3? ▼

First, unplug the dryer for 60 seconds to reset the control board. If error hE3 returns, the root cause (steam heater error) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Dryer with error code hE3? ▼

It depends on the cause. Most hE3 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Dryer Codes

All Samsung dryer error codes → All Samsung appliance codes →