Samsung Washing Machine ✅ Safe for Now

Samsung Washing Machine Error Code 5C

Samsung Washing Machine error code 5C: Drainage error.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against Samsung washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Washer error codes and troubleshooting — Official Samsung support guidance for washer error codes, water supply, drain, door, balance, and sensor troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe to leave off. Fix soon — water backup can cause mold or floor damage.

Can I fix it myself?

DIY Possible

Part: Drain pump / drain hose / filter

How much will it cost?

DIY: $0–$150 (pump or hose)

Technician: $100–$300

⏱ 20–45 min

What Does Error 5C Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code 5C: Drainage error.

What typically fails: Drain pump / drain hose / filter

What You're Probably Seeing

→ Water left in drum after cycle
→ Machine stops during spin
→ Wet clothes after full cycle

Common Causes

• Drain hose kinked, blocked, or installed too high
• Drain pump filter clogged with lint or debris
• Failed drain pump or loose drain-pump wiring

How to Fix It Yourself

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check and clean the drain pump filter (usually behind a small door at the bottom front)
3 Inspect the drain hose for kinks, blockages, or improper height
4 Test the drain pump — if it hums but won't move water, replace it ($50–$120 part)
5 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Screwdriver set, Bucket, Wet/dry vacuum · Time: 20–45 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code 5C mean? ▼

Error code 5C on a Samsung Washing Machine means: Drainage error. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Washing Machine error code 5C? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error 5C returns, the root cause (drainage error) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Washing Machine with error code 5C? ▼

It depends on the cause. Most 5C errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →