Whirlpool Dishwasher ⚠️ Stop Using

Whirlpool Dishwasher Error Code F8E4

Whirlpool Dishwasher error code F8E4: Diverter disc fault.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against Whirlpool Product Help dishwasher error-code guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Whirlpool Product Help - Dishwasher error codes and flashing lights — Official Whirlpool Product Help entry point for dishwasher error-code troubleshooting and owner-safe checks.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Stop using until the cause is identified. Check your owner's manual for model-specific guidance.

Can I fix it myself?

Technician Recommended

Part: See description above

How much will it cost?

DIY: Varies

Technician: $100–$500

⏱ 30–120 min

What Does Error F8E4 Mean on Your Whirlpool Dishwasher?

Whirlpool Dishwasher error code F8E4: Diverter disc fault.

What typically fails: See description above

What You're Probably Seeing

→ Error code on display
→ Cycle not completing
→ Machine stopping unexpectedly

Common Causes

• Water detected in the drip tray or leak pan
• Leaking hose, sump, inlet valve, or door gasket
• Float switch stuck or activated after an overflow event

What to Try First

1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Whirlpool Dishwasher error code F8E4 mean? ▼

Error code F8E4 on a Whirlpool Dishwasher means: Diverter disc fault. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Whirlpool Dishwasher error code F8E4? ▼

First, unplug the dishwasher for 60 seconds to reset the control board. If error F8E4 returns, the root cause (diverter disc fault) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Whirlpool Dishwasher with error code F8E4? ▼

It depends on the cause. Most F8E4 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Whirlpool Dishwasher Codes

All Whirlpool dishwasher error codes → All Whirlpool appliance codes →