🔍

B2601: No Latch Signal Sensed on Closing and Door Reversed

Severity
Medium
System
Vehicle Systems
Last reviewed: Last updated:

Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What Does B2601 Mean?

B2601 is a diagnostic trouble code indicating: No Latch Signal Sensed on Closing and Door Reversed. This code relates to the vehicle systems system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of B2601

Common Causes

Frequently Asked Questions

What does B2601 mean?
B2601 indicates: No Latch Signal Sensed on Closing and Door Reversed. The vehicle's computer has detected that the No Latch is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code B2601?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with B2601 for extended periods may cause additional problems.
How much does it cost to fix B2601?
Repair costs for B2601 typically range from $80 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

  • 🔧 Inspect No Latch and related wiring
  • 🔧 Replace faulty No Latch
  1. 1
    Find your vehicle above

    Click your make and model for real owner reports and common causes specific to your vehicle.

  2. 2
    Check for recalls

    Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.

  3. 3
    Get a professional diagnosis

    A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

Related Codes

B2600 Double Locking Door Motor Frozen B2602 Missing Latch Signal During Power Sliding Door Unlatch B2603 PSD Not Fully Closed During Self-Test B2604 Power Sliding Door On/Off Switch Open Circuit B2605 Disable Signal Open Circuit B2606 A/C Temperature Sensor Out of Range