C0575: Brake Pressure Sensor D Circuit Low

Severity

High

System

Chassis

Last reviewed: Jan 1, 0001 Last updated: Jan 1, 0001

Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What Does C0575 Mean?

C0575 is a diagnostic trouble code indicating: Brake Pressure Sensor D Circuit Low. This code relates to the chassis system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of C0575

⚠️ Check Engine Light (MIL) illuminated
⚠️ Brake Pressure Sensor D reading at zero or minimum value
⚠️ Related system not functioning or in fail-safe mode
⚠️ ABS or stability control warning light

Common Causes

🔍 Open or broken wire in Brake Pressure Sensor D circuit
🔍 Poor ground connection at Brake Pressure Sensor D
🔍 Faulty Brake Pressure Sensor D with no output signal
🔍 Disconnected or loose Brake Pressure Sensor D connector
🔍 Blown fuse in related circuit

Frequently Asked Questions

What does C0575 mean?

C0575 indicates: Brake Pressure Sensor D Circuit Low. The vehicle's computer has detected that the Brake Pressure Sensor D is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code C0575?

Only short distances if absolutely necessary. C0575 affects a critical system and should be diagnosed within a few days to avoid further damage.

How much does it cost to fix C0575?

Repair costs for C0575 typically range from $20 to $400, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Repair broken wire or restore ground in Brake Pressure Sensor D circuit
🔧 Clean and secure Brake Pressure Sensor D connector and ground points
🔧 Replace failed Brake Pressure Sensor D

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

Related Codes