C2200 on JEEP WRANGLER
ABS control module internal fault
Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.
Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
What C2200 Means on Your JEEP WRANGLER
C2200 on Jeep Wrangler points to abs control module internal fault. FixIt matched 33 NHTSA owner reports for this exact code/vehicle pair, so use this page to prioritize the most likely symptoms, components, and next checks before replacing parts.
Real JEEP WRANGLER Owner Reports
Source: NHTSA Complaints Database
"This is a common flaw with the abs brake system on many Chrysler Fiat vehicles and Chrysler fiat is doing NOtHING. My Jeep ABS computer module went bad . No damage, no off roading. Driving on highway and all the brake/abs/stability control lights lit up on my dash. The abs showed code “c2200” bad abs module and must re"
"I have a 2008 Jeep Wrangler Rubicon that has a lifetime powertrain warranty. Since I purchased the vehicle in 2008 I have maintained it exactly as required to keep the warranty valid. This includes the 5 year lifetime warranty powertrain inspections which are performed every 5 years. I have documented proof of the insp"
"The ABS control module is reporting a DTC code C2200 indicating an ABS module internal failure. The instrument panel warning lights for esp, bas, abs and the traction control are all continuously lit. This problem is continuous but has not been confirmed or inspected by a dealer. independent service center, police or i"
"While interstate driving the vehicle dash dinged, I looked down to find the ABS, Traction Control and Emergency Brake came on. I immediately pulled off the interstate for a visual inspection of the breaks and brake fluid but did not see any glaring issues. I took the vehicle to a local shop, they read the code (C2200)"
"My ABS, Brake and Traction Control lights all came on 1 month ago. Error code from shop is C2200 indicating a faulty ABS Module. They cannot find a replacement from any Jeep dealers. My online search also unsuccessful as none of the sites have them in stock. Been told by everyone that there is a national shortage and n"
All reports filed by vehicle owners directly with the U.S. Department of Transportation.
📊 Complaint Trend by Model Year
Common Causes on JEEP WRANGLER
Based on NHTSA complaint component analysis for this vehicle.
What To Do Next
-
1
Check for recalls on YOUR VIN
Go to nhtsa.gov/recalls and enter your VIN. If your vehicle is covered, repairs are free.
-
2
Get a proper diagnosis
A code alone doesn't tell you the exact failed part. A diagnostic at a shop ($50–$150) pinpoints the root cause before you spend money on parts.
-
3
Compare repair quotes
Get 2–3 quotes. Dealer vs. independent shop prices often differ 30–50% for the same repair.