P0877: Transmission Fluid Pressure Sensor/Switch D Circuit Low
Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.
Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).
Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.
What Does P0877 Mean?
P0877 is a diagnostic trouble code indicating: Transmission Fluid Pressure Sensor/Switch D Circuit Low. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P0877
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Transmission Fluid Pressure Sensor/Switch D reading at zero or minimum value
- β οΈ Related system not functioning or in fail-safe mode
- β οΈ Harsh or delayed shifting
Common Causes
- π Open or broken wire in Transmission Fluid Pressure Sensor/Switch D circuit
- π Poor ground connection at Transmission Fluid Pressure Sensor/Switch D
- π Faulty Transmission Fluid Pressure Sensor/Switch D with no output signal
- π Disconnected or loose Transmission Fluid Pressure Sensor/Switch D connector
- π Blown fuse in related circuit
Frequently Asked Questions
What does P0877 mean?
Can I drive with code P0877?
How much does it cost to fix P0877?
What To Do Next
Possible Fixes
- π§ Repair broken wire or restore ground in Transmission Fluid Pressure Sensor/Switch D circuit
- π§ Clean and secure Transmission Fluid Pressure Sensor/Switch D connector and ground points
- π§ Replace failed Transmission Fluid Pressure Sensor/Switch D
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.