P08C7: Pressure Control Solenoid M Intermittent
Severity
High
System
Transmission
What Does P08C7 Mean?
P08C7 is a diagnostic trouble code indicating: Pressure Control Solenoid M Intermittent. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P08C7
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Pressure Control Solenoid M signal cutting in and out
- β οΈ Related system working sometimes but not consistently
- β οΈ Harsh or delayed shifting
Common Causes
- π Loose or intermittent connection at Pressure Control Solenoid M
- π Wire chafing causing intermittent contact
- π Pressure Control Solenoid M failing under heat or vibration
- π Corroded connector pins with partial contact
Frequently Asked Questions
What does P08C7 mean?
P08C7 indicates: Pressure Control Solenoid M Intermittent. The vehicle's computer has detected that the Pressure Control Solenoid M is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P08C7?
Only short distances if absolutely necessary. P08C7 affects a critical system and should be diagnosed within a few days to avoid further damage.
How much does it cost to fix P08C7?
Repair costs for P08C7 typically range from $30 to $500, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Inspect and reseat all Pressure Control Solenoid M connectors
- π§ Repair chafed or damaged wiring in Pressure Control Solenoid M circuit
- π§ Replace Pressure Control Solenoid M if failing intermittently
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P0800
Transfer Case Control System (MIL Request)
P0801
Reverse Inhibit Control Circuit/Open
P0802
Transmission Control System MIL Request Circuit/Open
P0803
Upshift/Skip Shift Solenoid Control Circuit
P0804
Upshift/Skip Shift Lamp Control Circuit
P0805
Clutch Position Sensor A Circuit
P0806
Clutch Position Sensor A Circuit Range/Performance
P0807
Clutch Position Sensor A Circuit Low
P0808
Clutch Position Sensor A Circuit High
P0809
Clutch Position Sensor A Circuit Intermittent