P099E: Shift Solenoid H Control Circuit Low
Severity
High
System
Transmission
What Does P099E Mean?
P099E is a diagnostic trouble code indicating: Shift Solenoid H Control Circuit Low. This code relates to the transmission system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P099E
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Shift Solenoid H reading at zero or minimum value
- β οΈ Related system not functioning or in fail-safe mode
- β οΈ Harsh or delayed shifting
Common Causes
- π Open or broken wire in Shift Solenoid H circuit
- π Poor ground connection at Shift Solenoid H
- π Faulty Shift Solenoid H with no output signal
- π Disconnected or loose Shift Solenoid H connector
- π Blown fuse in related circuit
Frequently Asked Questions
What does P099E mean?
P099E indicates: Shift Solenoid H Control Circuit Low. The vehicle's computer has detected that the Shift Solenoid H is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P099E?
Only short distances if absolutely necessary. P099E affects a critical system and should be diagnosed within a few days to avoid further damage.
How much does it cost to fix P099E?
Repair costs for P099E typically range from $20 to $500, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Repair broken wire or restore ground in Shift Solenoid H circuit
- π§ Clean and secure Shift Solenoid H connector and ground points
- π§ Replace failed Shift Solenoid H
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P0900
Clutch A Actuator Control Circuit/Open
P0901
Clutch A Actuator Control Circuit Range/Performance
P0902
Clutch A Actuator Control Circuit Low
P0903
Clutch A Actuator Control Circuit High
P0904
Gate Select Position Circuit A
P0905
Gate Select Position Circuit A Range/Performance
P0906
Gate Select Position Circuit A Low
P0907
Gate Select Position Circuit A High
P0908
Gate Select Position Circuit A Intermittent
P0909
Gate Select Control Error