P1083 — Fuel Control Mixture Lean Bank 1 Sensor 1

What Does P1083 Mean?

P1083 is a manufacturer-specific diagnostic trouble code: Fuel Control Mixture Lean Bank 1 Sensor 1. This code applies to BMW vehicles. Unlike generic OBD-II codes, manufacturer-specific codes are defined by the vehicle maker and may only apply to certain makes and models.

Symptoms of P1083

⚠️ Check Engine Light (MIL) illuminated
⚠️ Fuel Control Mixture Lean Bank 1 Sensor 1 not functioning as expected
⚠️ Related system may be in fail-safe mode
⚠️ Reduced engine performance

Common Causes

🔍 Faulty Fuel Control Mixture Lean Bank 1 Sensor 1
🔍 Wiring or connector issue in Fuel Control Mixture Lean Bank 1 Sensor 1 circuit
🔍 Related mechanical or electrical fault
🔍 ECM/PCM issue (rare)

Frequently Asked Questions

What does P1083 mean?

P1083 indicates: Fuel Control Mixture Lean Bank 1 Sensor 1. The vehicle's computer has detected that the Fuel Control Mixture Lean Bank 1 Sensor 1 is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P1083?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P1083 for extended periods may cause additional problems.

How much does it cost to fix P1083?

Repair costs for P1083 typically range from $80 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect Fuel Control Mixture Lean Bank 1 Sensor 1 and related wiring
🔧 Replace faulty Fuel Control Mixture Lean Bank 1 Sensor 1

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P1083: Fuel Control Mixture Lean Bank 1 Sensor 1