🔍

P1607: Vehicle Speed Signal Error Message From Instrument Cluster

VOLKSWAGEN BUICK CADILLAC CHEVY GM GMC OLDSMOBILE SATURN
Severity
Medium
System
Manufacturer-Specific Powertrain

What Does P1607 Mean?

P1607 is a manufacturer-specific diagnostic trouble code: Vehicle Speed Signal Error Message From Instrument Cluster. This code applies to VOLKSWAGEN, BUICK, CADILLAC, CHEVY, GM vehicles. Unlike generic OBD-II codes, manufacturer-specific codes are defined by the vehicle maker and may only apply to certain makes and models.

Symptoms of P1607

Common Causes

Frequently Asked Questions

What does P1607 mean?
P1607 indicates: Vehicle Speed Signal Error Message From Instrument Cluster. The vehicle's computer has detected that the Vehicle Speed is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P1607?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P1607 for extended periods may cause additional problems.
How much does it cost to fix P1607?
Repair costs for P1607 typically range from $80 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

  • 🔧 Inspect Vehicle Speed and related wiring
  • 🔧 Replace faulty Vehicle Speed
  1. 1
    Find your vehicle above

    Click your make and model for real owner reports and common causes specific to your vehicle.

  2. 2
    Check for recalls

    Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.

  3. 3
    Get a professional diagnosis

    A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

Related Codes

P1600 PCM TCM Serial Communication Circuit Fault P1601 Powertrain Control Module Communication Line To TCM Error P1602 Powertrain Control Module Communication Line To TCM Error, Immobilizer System Communication Error With Powertrain Control Module P1603 Control Module Self Test Torque Monitoring P1604 Control Module Self Test Speed Monitoring P1605 Powertrain Control Module Keep Alive Memory Test Error P1606 Rough Road Spec Engine Torque ABS ECU Electrical Malfunction P1608 Steering Angle Signal Error Message From Steering Angle Sensor P1609 Internal Control Module CPU To CPU Communication Failure P1610 Voltage Supply Missing Or Relay Module K40