P2407: EVAP System Leak Detection Pump Sense Circuit Intermittent/Erratic

Severity

Low

System

Powertrain

Last reviewed: Jan 1, 0001 Last updated: Jan 1, 0001

Methodology: We combine code standards with complaint and reliability patterns, then review for clear, vehicle-first diagnosis steps.

Sources: SAE/OBD-II definitions, manufacturer service information, and public reliability reports (including NHTSA where applicable).

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

What Does P2407 Mean?

P2407 is a diagnostic trouble code indicating: EVAP System Leak Detection Pump Sense Circuit Intermittent/Erratic. This code relates to the powertrain system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P2407

⚠️ Check Engine Light (MIL) illuminated
⚠️ EVAP System Leak Detection Pump Sense signal cutting in and out
⚠️ Related system working sometimes but not consistently
⚠️ Reduced engine performance

Common Causes

🔍 Loose or intermittent connection at EVAP System Leak Detection Pump Sense
🔍 Wire chafing causing intermittent contact
🔍 EVAP System Leak Detection Pump Sense failing under heat or vibration
🔍 Corroded connector pins with partial contact

Frequently Asked Questions

What does P2407 mean?

P2407 indicates: EVAP System Leak Detection Pump Sense Circuit Intermittent/Erratic. The vehicle's computer has detected that the EVAP System Leak Detection Pump Sense is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P2407?

Yes, P2407 is generally safe to drive with in the short term. However, it should still be addressed to pass emissions testing and prevent potential secondary issues.

How much does it cost to fix P2407?

Repair costs for P2407 typically range from $30 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect and reseat all EVAP System Leak Detection Pump Sense connectors
🔧 Repair chafed or damaged wiring in EVAP System Leak Detection Pump Sense circuit
🔧 Replace EVAP System Leak Detection Pump Sense if failing intermittently

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.