P2823: Pressure Control Solenoid J Intermittent
Severity
Low
System
Powertrain
What Does P2823 Mean?
P2823 is a diagnostic trouble code indicating: Pressure Control Solenoid J Intermittent. This code relates to the powertrain system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P2823
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Pressure Control Solenoid J signal cutting in and out
- β οΈ Related system working sometimes but not consistently
- β οΈ Reduced engine performance
Common Causes
- π Loose or intermittent connection at Pressure Control Solenoid J
- π Wire chafing causing intermittent contact
- π Pressure Control Solenoid J failing under heat or vibration
- π Corroded connector pins with partial contact
Frequently Asked Questions
What does P2823 mean?
P2823 indicates: Pressure Control Solenoid J Intermittent. The vehicle's computer has detected that the Pressure Control Solenoid J is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P2823?
Yes, P2823 is generally safe to drive with in the short term. However, it should still be addressed to pass emissions testing and prevent potential secondary issues.
How much does it cost to fix P2823?
Repair costs for P2823 typically range from $30 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Inspect and reseat all Pressure Control Solenoid J connectors
- π§ Repair chafed or damaged wiring in Pressure Control Solenoid J circuit
- π§ Replace Pressure Control Solenoid J if failing intermittently
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P2800
Transmission Range Sensor B Circuit (PRNDL Input)
P2801
Transmission Range Sensor B Circuit Range/Performance
P2802
Transmission Range Sensor B Circuit Low
P2803
Transmission Range Sensor B Circuit High
P2804
Transmission Range Sensor B Circuit Intermittent
P2805
Transmission Range Sensor A/B Correlation
P2806
Transmission Range Sensor Alignment
P2807
Pressure Control Solenoid G
P2808
Pressure Control Solenoid G Performance/Stuck Off
P2809
Pressure Control Solenoid G Stuck On