P2833 — Shift Fork A Position Circuit Low

What Does P2833 Mean?

P2833 is a diagnostic trouble code indicating: Shift Fork A Position Circuit Low. This code relates to the powertrain system. It has been reported in NHTSA complaints across 1 different vehicle models.

Symptoms of P2833

⚠️ Check engine light illuminated

Common Causes

🔍 Sensor or control module malfunction

Real Owner Reports

From NHTSA complaint database — actual owner descriptions.

"WHEN I WENT TO WARM UP MY CAR THE CHECK ENGINE LIGHT IS ON AND THE TRANSMISSION DOESN'T WORK RIGHT. IT TAKES A WHILE TO ENGAGE THE GEAR AND WON'T GO PAST 30 MPH. IT SHIFTS VERY ROUGH. IT HAS BEEN DOING THIS FOR A WHILE NOW EVERY TWO DAYS NOW. I HAVE DONE THE TCM ADAPTIVE LEARNING SERVICE IN FORSCAN "
— Ford Focus owner, 09/25/2020

Source: NHTSA Complaints Database

Most Reported Vehicles for P2833

Based on NHTSA owner complaint data.

#	Vehicle	Reports
1	FORD FOCUS

Frequently Asked Questions

Can I drive with this code?

It depends on the severity. If the vehicle runs normally, short trips are usually OK. If you notice performance issues, drivability problems, or warning lights beyond the check engine light, get it checked soon.

Will this code clear itself?

Some codes clear automatically after the underlying issue is fixed and several drive cycles pass. But the root cause must be addressed first.

How do I find the exact cause?

A code alone doesn't pinpoint the failed part. You need a diagnostic scan ($50-150 at most shops) that reads freeze frame data and live sensor readings to identify the specific component.

What To Do Next

Possible Fixes

🔧 Have the code scanned with a professional-grade scanner to read freeze frame data
🔧 Test the relevant sensor(s) with a multimeter before replacing
🔧 If DIY repair isn't feasible, get a diagnostic from a trusted mechanic ($50-150)

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P2833: Shift Fork A Position Circuit Low