P28AE: Cylinder 8 Ion Current Sense Circuit Low
Severity
Medium
System
Powertrain
What Does P28AE Mean?
P28AE is a diagnostic trouble code indicating: Cylinder 8 Ion Current Sense Circuit Low. This code relates to the powertrain system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of P28AE
- β οΈ Check Engine Light (MIL) illuminated
- β οΈ Cylinder 8 Ion Current Sense reading at zero or minimum value
- β οΈ Related system not functioning or in fail-safe mode
- β οΈ Reduced engine performance
Common Causes
- π Open or broken wire in Cylinder 8 Ion Current Sense circuit
- π Poor ground connection at Cylinder 8 Ion Current Sense
- π Faulty Cylinder 8 Ion Current Sense with no output signal
- π Disconnected or loose Cylinder 8 Ion Current Sense connector
- π Blown fuse in related circuit
Frequently Asked Questions
What does P28AE mean?
P28AE indicates: Cylinder 8 Ion Current Sense Circuit Low. The vehicle's computer has detected that the Cylinder 8 Ion Current Sense is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code P28AE?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P28AE for extended periods may cause additional problems.
How much does it cost to fix P28AE?
Repair costs for P28AE typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80β$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- π§ Repair broken wire or restore ground in Cylinder 8 Ion Current Sense circuit
- π§ Clean and secure Cylinder 8 Ion Current Sense connector and ground points
- π§ Replace failed Cylinder 8 Ion Current Sense
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50β$150) pinpoints the root cause.
Related Codes
P2800
Transmission Range Sensor B Circuit (PRNDL Input)
P2801
Transmission Range Sensor B Circuit Range/Performance
P2802
Transmission Range Sensor B Circuit Low
P2803
Transmission Range Sensor B Circuit High
P2804
Transmission Range Sensor B Circuit Intermittent
P2805
Transmission Range Sensor A/B Correlation
P2806
Transmission Range Sensor Alignment
P2807
Pressure Control Solenoid G
P2808
Pressure Control Solenoid G Performance/Stuck Off
P2809
Pressure Control Solenoid G Stuck On