P2E18 — Intermediate Shaft Selection Actuator Position Sensor Circuit High

What Does P2E18 Mean?

P2E18 is a diagnostic trouble code indicating: Intermediate Shaft Selection Actuator Position Sensor Circuit High. This code relates to the vehicle systems system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P2E18

⚠️ Check Engine Light (MIL) illuminated
⚠️ Intermediate Shaft Selection Actuator Position Sensor reading stuck at maximum value
⚠️ Related system operating erratically or in default mode
⚠️ System warning light illuminated

Common Causes

🔍 Short to voltage in Intermediate Shaft Selection Actuator Position Sensor wiring harness
🔍 Corroded or water-damaged Intermediate Shaft Selection Actuator Position Sensor connector
🔍 Faulty Intermediate Shaft Selection Actuator Position Sensor outputting maximum voltage
🔍 Damaged wiring rubbing against metal components
🔍 ECM/PCM internal fault (rare)

Frequently Asked Questions

What does P2E18 mean?

P2E18 indicates: Intermediate Shaft Selection Actuator Position Sensor Circuit High. The vehicle's computer has detected that the Intermediate Shaft Selection Actuator Position Sensor is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P2E18?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P2E18 for extended periods may cause additional problems.

How much does it cost to fix P2E18?

Repair costs for P2E18 typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect and repair Intermediate Shaft Selection Actuator Position Sensor wiring for short to voltage
🔧 Clean or replace corroded Intermediate Shaft Selection Actuator Position Sensor connector
🔧 Replace faulty Intermediate Shaft Selection Actuator Position Sensor

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P2E18: Intermediate Shaft Selection Actuator Position Sensor Circuit High