P2E6D — Hybrid/EV Battery Pack “A” Cell Thickness Sensor Circuit High

What Does P2E6D Mean?

P2E6D is a diagnostic trouble code indicating: Hybrid/EV Battery Pack “A” Cell Thickness Sensor Circuit High. This code relates to the vehicle systems system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.

Symptoms of P2E6D

⚠️ Check Engine Light (MIL) illuminated
⚠️ Hybrid/EV Battery Pack “A” Cell Thickness Sensor reading stuck at maximum value
⚠️ Related system operating erratically or in default mode
⚠️ System warning light illuminated

Common Causes

🔍 Short to voltage in Hybrid/EV Battery Pack “A” Cell Thickness Sensor wiring harness
🔍 Corroded or water-damaged Hybrid/EV Battery Pack “A” Cell Thickness Sensor connector
🔍 Faulty Hybrid/EV Battery Pack “A” Cell Thickness Sensor outputting maximum voltage
🔍 Damaged wiring rubbing against metal components
🔍 ECM/PCM internal fault (rare)

Frequently Asked Questions

What does P2E6D mean?

P2E6D indicates: Hybrid/EV Battery Pack “A” Cell Thickness Sensor Circuit High. The vehicle's computer has detected that the Hybrid/EV Battery Pack “A” Cell Thickness Sensor is not operating within its expected parameters and stored this diagnostic trouble code.

Can I drive with code P2E6D?

You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with P2E6D for extended periods may cause additional problems.

How much does it cost to fix P2E6D?

Repair costs for P2E6D typically range from $20 to $300, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.

What To Do Next

Possible Fixes

🔧 Inspect and repair Hybrid/EV Battery Pack “A” Cell Thickness Sensor wiring for short to voltage
🔧 Clean or replace corroded Hybrid/EV Battery Pack “A” Cell Thickness Sensor connector
🔧 Replace faulty Hybrid/EV Battery Pack “A” Cell Thickness Sensor

1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.

P2E6D: Hybrid/EV Battery Pack “A” Cell Thickness Sensor Circuit High