U015F: Lost Communication With Automated Driving System Interface Module “B
Severity
Medium
System
Network Communication
What Does U015F Mean?
U015F is a diagnostic trouble code indicating: Lost Communication With Automated Driving System Interface Module “B. This code relates to the network communication system. The vehicle's computer detected a condition outside normal operating parameters and stored this code.
Symptoms of U015F
- ⚠️ Check Engine Light (MIL) illuminated
- ⚠️ No communication with Automated Driving System Interface Module “B
- ⚠️ Multiple warning lights may illuminate simultaneously
- ⚠️ Related system completely inoperative
- ⚠️ Multiple warning lights on dashboard
Common Causes
- 🔍 CAN bus wiring fault (open or shorted) to Automated Driving System Interface Module “B
- 🔍 Power or ground supply issue to Automated Driving System Interface Module “B
- 🔍 Automated Driving System Interface Module “B internal failure
- 🔍 Water intrusion damaging module or connectors
- 🔍 CAN bus termination resistor fault
Frequently Asked Questions
What does U015F mean?
U015F indicates: Lost Communication With Automated Driving System Interface Module “B. The vehicle's computer has detected that the Automated Driving System Interface Module “B is not operating within its expected parameters and stored this diagnostic trouble code.
Can I drive with code U015F?
You can drive short distances for essential trips, but schedule a diagnosis soon. Driving with U015F for extended periods may cause additional problems.
How much does it cost to fix U015F?
Repair costs for U015F typically range from $80 to $1200, depending on the root cause. Simple wiring or connector repairs are on the lower end, while component replacement costs more. A proper diagnosis ($80–$150 at most shops) will identify the exact cause before committing to expensive parts.
What To Do Next
Possible Fixes
- 🔧 Inspect CAN bus wiring to Automated Driving System Interface Module “B for damage
- 🔧 Check power and ground supply to Automated Driving System Interface Module “B
- 🔧 Replace failed Automated Driving System Interface Module “B
-
1
Find your vehicle above
Click your make and model for real owner reports and common causes specific to your vehicle.
-
2
Check for recalls
Go to nhtsa.gov/recalls and enter your VIN. Free repairs if covered.
-
3
Get a professional diagnosis
A code alone doesn't identify the exact failed part. A diagnostic ($50–$150) pinpoints the root cause.
Related Codes
B0130
A/V Sensor Washer Fluid B Control Circuit
B0131
A/V Sensor Washer Fluid C Control Circuit
B0132
A/V Sensor Washer Fluid D Control Circuit
B0133
A/V Sensor Washer Fluid E Control Circuit
B0134
A/V Sensor Washer Fluid F Control Circuit
P0130
O2 Sensor Circuit Bank 1 Sensor 1
P0131
O2 Sensor Circuit Low Voltage Bank 1 Sensor 1
P0132
O2 Sensor Circuit High Voltage Bank 1 Sensor 1