🔍
Lennox Central AC ✅ Safe to Use

Lennox Central AC Error Code E5

Lennox Central Air Conditioner error code E5: Discharge temperature sensor failure.

Last reviewed: Last updated:

Methodology: We combine OEM HVAC documentation with field repair patterns, then review for safety-first troubleshooting.

Sources: HVAC manufacturer documentation, installation/service manuals, and technician-reported repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Is it safe?
✅ Safe temporarily
Safe to use briefly. A faulty sensor causes poor performance but rarely immediate danger.
Can I fix it?
DIY Possible
Tools: Multimeter, Screwdriver set
Repair cost
DIY: $10–$60 (sensor)
Pro: $80–$250
⏱ 20–45 min

What Does Error Code E5 Mean?

Lennox Central Air Conditioner error code E5: Discharge temperature sensor failure.

Part that typically fails: Temperature sensor / thermistor

Safe to use briefly. A faulty sensor causes poor performance but rarely immediate danger.

Symptoms You May Notice

How to Fix It Yourself

  1. 1 Check your owner's manual for model-specific guidance on error code reset procedures
  2. 2 Test the temperature sensor with a multimeter — replace if reading is outside spec
  3. 3 Inspect sensor wiring harness for damage or loose connections
  4. 4 If the error persists after reset and basic checks, contact a qualified technician
🛠️ Tools needed: Multimeter, Screwdriver set · Time: 20–45 min
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.

Frequently Asked Questions

What does Lennox Central Air Conditioner error code E5 mean? ▼
Error code E5 on a Lennox central air conditioner indicates: Discharge temperature sensor failure. The unit has detected this condition and has limited or stopped operation to prevent further damage.
How do I fix Lennox Central Air Conditioner error code E5? ▼
Start by powering the unit off for 30 seconds and restarting. If error E5 returns, the underlying cause (discharge temperature sensor failure) needs to be addressed. Check wiring connections and filters first before replacing components.
Is Lennox error code E5 serious? ▼
It depends on the root cause. Some E5 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.

More Lennox Central AC Error Codes

All Lennox central ac codes → All Lennox HVAC codes →

Was this page helpful?

Rate the helpfulness of this page