🔍
Lennox Furnace ⛔ Do Not Use

Lennox Furnace Error Code 226

Lennox Furnace error code 226: High gas pressure.

Last reviewed: Last updated:

Methodology: We combine OEM HVAC documentation with field repair patterns, then review for safety-first troubleshooting.

Sources: HVAC manufacturer documentation, installation/service manuals, and technician-reported repair patterns.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Is it safe?
⛔ No — stop using
Do NOT operate — potential gas or CO hazard. Ventilate the area and call a technician immediately.
Can I fix it?
Technician Required
Repair cost
Pro: $150–$600
⏱ 1–3 hours (pro)

What Does Error Code 226 Mean?

Lennox Furnace error code 226: High gas pressure.

Part that typically fails: Gas valve / igniter / heat exchanger

Do NOT operate — potential gas or CO hazard. Ventilate the area and call a technician immediately.

Symptoms You May Notice

What the Technician Will Do

🔧 Professional repair required. Do not attempt DIY — this repair requires specialized tools or certification.
  1. 1 Check your owner's manual for model-specific guidance on error code reset procedures
  2. 2 Contact a licensed HVAC technician — refrigerant handling requires EPA 608 certification
  3. 3 If the error persists after reset and basic checks, contact a qualified technician
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.

Frequently Asked Questions

What does Lennox Furnace error code 226 mean? ▼
Error code 226 on a Lennox gas furnace indicates: High gas pressure. The unit has detected this condition and has limited or stopped operation to prevent further damage.
How do I fix Lennox Furnace error code 226? ▼
Start by powering the unit off for 30 seconds and restarting. If error 226 returns, the underlying cause (high gas pressure) needs to be addressed. Check wiring connections and filters first before replacing components.
Is Lennox error code 226 serious? ▼
It depends on the root cause. Some 226 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.

More Lennox Furnace Error Codes

All Lennox furnace codes → All Lennox HVAC codes →

Was this page helpful?

Rate the helpfulness of this page