Lennox
-
✅ Safe to Use
Lennox - Error Code 285
Lennox Furnace error code 285: Indoor blower motor fault.
Is it safe?
✅ Safe temporarily
Safe — unit won't run with door open. A common and inexpensive fix.
Can I fix it?
DIY Possible
Tools: Screwdriver set, Putty knife
Repair cost
DIY: $20–$100 (latch assembly)
Pro: $80–$200
⏱ 15–30 min
What Does Error Code 285 Mean?
Lennox Furnace error code 285: Indoor blower motor fault.
Part that typically fails: Door latch / door lock assembly
Safe — unit won't run with door open. A common and inexpensive fix.
Symptoms You May Notice
- ⚠️ Error code flashing on furnace board
- ⚠️ No heat
- ⚠️ Furnace cycling on and off
How to Fix It Yourself
- 1 Check your owner's manual for model-specific guidance on error code reset procedures
- 2 Check for debris obstructing the fan blades on indoor or outdoor unit
- 3 A technician should test motor windings and run capacitor — replace if failed
- 4 If the error persists after reset and basic checks, contact a qualified technician
🛠️ Tools needed: Screwdriver set, Putty knife
· Time: 15–30 min
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.
Frequently Asked Questions
What does Lennox Furnace error code 285 mean? ▼
Error code 285 on a Lennox gas furnace indicates: Indoor blower motor fault. The unit has detected this condition and has limited or stopped operation to prevent further damage.
How do I fix Lennox Furnace error code 285? ▼
Start by powering the unit off for 30 seconds and restarting. If error 285 returns, the underlying cause (indoor blower motor fault) needs to be addressed. Check wiring connections and filters first before replacing components.
Is Lennox error code 285 serious? ▼
It depends on the root cause. Some 285 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.