Navien - ✅ Safe to Use

Navien - Error Code E011

Q: "What does Navien Water Heater error code E011 mean?"

"Error code E011 on a Navien tankless water heater indicates: Air pressure switch stuck closed. The unit has detected this condition and has limited or stopped operation to prevent further damage."

Q: "How do I fix Navien Water Heater error code E011?"

"Start by powering the unit off for 30 seconds and restarting. If error E011 returns, the underlying cause (air pressure switch stuck closed) needs to be addressed. Check wiring connections and filters first before replacing components."

Q: "Is Navien error code E011 serious?"

"It depends on the root cause. Some E011 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage."

Navien Water Heater error code E011: Air pressure switch stuck closed.

Is it safe?

✅ Safe temporarily

Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.

Can I fix it?

DIY Possible

Tools: Multimeter, Screwdriver set, Nut driver

Repair cost

DIY: $20–$100 (element or thermistor)

Pro: $100–$300

⏱ 30–60 min

What Does Error Code E011 Mean?

Navien Water Heater error code E011: Air pressure switch stuck closed.

Part that typically fails: Heating element / thermal fuse / thermistor

Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.

Symptoms You May Notice

⚠️ Unit fires then shuts off
⚠️ Inconsistent hot water
⚠️ Error code on display

Troubleshooting Steps

1 Check your owner's manual for model-specific guidance on error code reset procedures
2 Contact a licensed HVAC technician — refrigerant handling requires EPA 608 certification
3 If the error persists after reset and basic checks, contact a qualified technician

🛠️ Tools needed: Multimeter, Screwdriver set, Nut driver · Time: 30–60 min

⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.

Frequently Asked Questions

What does Navien Water Heater error code E011 mean? ▼

Error code E011 on a Navien tankless water heater indicates: Air pressure switch stuck closed. The unit has detected this condition and has limited or stopped operation to prevent further damage.

How do I fix Navien Water Heater error code E011? ▼

Start by powering the unit off for 30 seconds and restarting. If error E011 returns, the underlying cause (air pressure switch stuck closed) needs to be addressed. Check wiring connections and filters first before replacing components.

Is Navien error code E011 serious? ▼

It depends on the root cause. Some E011 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.

More Navien - Error Codes

All Navien - codes → All Navien HVAC codes →