Rinnai - ✅ Safe to Use

Rinnai - Error Code 58

Q: "What does Rinnai Water Heater error code 58 mean?"

"Error code 58 on a Rinnai tankless water heater indicates: Abnormal sensor reading. The unit has detected this condition and has limited or stopped operation to prevent further damage."

Q: "How do I fix Rinnai Water Heater error code 58?"

"Start by powering the unit off for 30 seconds and restarting. If error 58 returns, the underlying cause (abnormal sensor reading) needs to be addressed. Check wiring connections and filters first before replacing components."

Q: "Is Rinnai error code 58 serious?"

"It depends on the root cause. Some 58 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage."

Rinnai Water Heater error code 58: Abnormal sensor reading.

Is it safe?

✅ Safe temporarily

Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.

Can I fix it?

DIY Possible

Tools: Multimeter, Screwdriver set, Nut driver

Repair cost

DIY: $20–$100 (element or thermistor)

Pro: $100–$300

⏱ 30–60 min

What Does Error Code 58 Mean?

Rinnai Water Heater error code 58: Abnormal sensor reading.

Part that typically fails: Heating element / thermal fuse / thermistor

Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.

Symptoms You May Notice

⚠️ Water temperature fluctuating
⚠️ Unit running constantly
⚠️ Error on control panel

Troubleshooting Steps

1 Check your owner's manual for model-specific guidance on error code reset procedures
2 Test the temperature sensor with a multimeter — replace if reading is outside spec
3 Inspect sensor wiring harness for damage or loose connections
4 If the error persists after reset and basic checks, contact a qualified technician

🛠️ Tools needed: Multimeter, Screwdriver set, Nut driver · Time: 30–60 min

⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.

Frequently Asked Questions

What does Rinnai Water Heater error code 58 mean? ▼

Error code 58 on a Rinnai tankless water heater indicates: Abnormal sensor reading. The unit has detected this condition and has limited or stopped operation to prevent further damage.

How do I fix Rinnai Water Heater error code 58? ▼

Start by powering the unit off for 30 seconds and restarting. If error 58 returns, the underlying cause (abnormal sensor reading) needs to be addressed. Check wiring connections and filters first before replacing components.

Is Rinnai error code 58 serious? ▼

It depends on the root cause. Some 58 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.

More Rinnai - Error Codes

All Rinnai - codes → All Rinnai HVAC codes →