Trane
-
⛔ Do Not Use
Trane - Error Code 6
Trane Central Air Conditioner error code 6: Open rollout switch.
Is it safe?
⛔ No — stop using
Do NOT operate — potential gas or CO hazard. Ventilate the area and call a technician immediately.
Can I fix it?
Technician Required
Repair cost
Pro: $150–$600
⏱ 1–3 hours (pro)
What Does Error Code 6 Mean?
Trane Central Air Conditioner error code 6: Open rollout switch.
Part that typically fails: Gas valve / igniter / heat exchanger
Do NOT operate — potential gas or CO hazard. Ventilate the area and call a technician immediately.
Symptoms You May Notice
- ⚠️ Error light on thermostat or air handler
- ⚠️ AC not cooling
- ⚠️ System shutting down unexpectedly
What the Technician Will Do
🔧 Professional repair required. Do not attempt DIY — this repair requires specialized tools or certification.
- 1 Check your owner's manual for model-specific guidance on error code reset procedures
- 2 If the error persists after reset and basic checks, contact a qualified technician
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.
Frequently Asked Questions
What does Trane Central Air Conditioner error code 6 mean? ▼
Error code 6 on a Trane central air conditioner indicates: Open rollout switch. The unit has detected this condition and has limited or stopped operation to prevent further damage.
How do I fix Trane Central Air Conditioner error code 6? ▼
Start by powering the unit off for 30 seconds and restarting. If error 6 returns, the underlying cause (open rollout switch) needs to be addressed. Check wiring connections and filters first before replacing components.
Is Trane error code 6 serious? ▼
It depends on the root cause. Some 6 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.