York
-
⚠️ Use With Caution
York - Error Code 31
York Furnace error code 31: Pressure switch stuck closed.
Is it safe?
⚠️ Use with caution
Stop using until the cause is identified. Check your owner's manual for model-specific guidance.
Can I fix it?
Technician Recommended
Tools: Multimeter, Screwdriver set
Repair cost
DIY: Varies
Pro: $100–$500
⏱ 30–120 min
What Does Error Code 31 Mean?
York Furnace error code 31: Pressure switch stuck closed.
Part that typically fails: See description above
Stop using until the cause is identified. Check your owner's manual for model-specific guidance.
Symptoms You May Notice
- ⚠️ Furnace shuts off mid-cycle
- ⚠️ Inducer running but no ignition
- ⚠️ Pressure switch fault light
Troubleshooting Steps
- 1 Check your owner's manual for model-specific guidance on error code reset procedures
- 2 Contact a licensed HVAC technician — refrigerant handling requires EPA 608 certification
- 3 If the error persists after reset and basic checks, contact a qualified technician
🛠️ Tools needed: Multimeter, Screwdriver set
· Time: 30–120 min
⚡ Quick tip: Always try a full power reset first — turn the unit off at the breaker, wait 30 seconds, restore power.
Frequently Asked Questions
What does York Furnace error code 31 mean? ▼
Error code 31 on a York gas furnace indicates: Pressure switch stuck closed. The unit has detected this condition and has limited or stopped operation to prevent further damage.
How do I fix York Furnace error code 31? ▼
Start by powering the unit off for 30 seconds and restarting. If error 31 returns, the underlying cause (pressure switch stuck closed) needs to be addressed. Check wiring connections and filters first before replacing components.
Is York error code 31 serious? ▼
It depends on the root cause. Some 31 errors resolve with a reset. Others indicate a failed component that requires professional repair. Don't continue operating with this error — it can lead to further damage.