🚗 FORD EDGE — Diagnostic Trouble Codes
21 diagnostic trouble codes have been reported by FORD EDGE owners to NHTSA. Click any code for detailed reports and causes specific to this vehicle.
| Code | Description | Reports |
|---|---|---|
| P0302 | Cylinder 2 Misfire Detected | 46 |
| P0301 | Cylinder 1 Misfire Detected | 35 |
| P0316 | Engine Misfire Detected on Startup (First 1000 Revolutions) | 35 |
| P0303 | Cylinder 3 Misfire Detected | 32 |
| P0304 | Cylinder 4 Misfire Detected | 25 |
| P2111 | Throttle Actuator A Control System - Stuck Open | 24 |
| P0456 | EVAP System Leak Detected (very small leak) | 10 |
| P0217 | Engine Coolant Over Temperature Condition | 9 |
| P0300 | Random/Multiple Cylinder Misfire Detected | 7 |
| P1450 | Unable To Bleed Up Fuel Tank Vacuum | 7 |
| P1299 | Cylinder Head Overtemperature Protection Active | 5 |
| P0722 | Output Shaft Speed Sensor Circuit No Signal | 5 |
| P2112 | Throttle Actuator A Control System - Stuck Closed | 4 |
| P0720 | Output Shaft Speed Sensor Circuit | 4 |
| P0741 | Torque Converter Clutch Circuit Performance/Stuck Off | 3 |
| P0299 | Turbocharger/Supercharger A Underboost Condition | 3 |
| P2196 | O2 Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1 | 3 |
| P2195 | O2 Sensor Signal Biased/Stuck Lean Bank 1 Sensor 1 | 2 |
| P0352 | Ignition Coil B Primary Control Circuit/Open | 2 |
| P0715 | Input/Turbine Shaft Speed Sensor A Circuit | 2 |
| P2197 | O2 Sensor Signal Biased/Stuck Lean Bank 2 Sensor 1 | 2 |
Report counts based on NHTSA owner complaints. Codes are linked to the generic DTC code page for more information.
Got a Code on Your FORD EDGE?
-
1
Find your code above
Click the code to see detailed data for your specific FORD EDGE, including real owner reports.
-
2
Check for recalls
Enter your VIN at nhtsa.gov/recalls to check for free recall repairs.
-
3
Get diagnosed
A code is a starting point, not a final answer. Get a proper diagnosis before replacing parts.