🚗 FORD FUSION — Diagnostic Trouble Codes
29 diagnostic trouble codes have been reported by FORD FUSION owners to NHTSA. Click any code for detailed reports and causes specific to this vehicle.
| Code | Description | Reports |
|---|---|---|
| P2111 | Throttle Actuator A Control System - Stuck Open | 117 |
| P2112 | Throttle Actuator A Control System - Stuck Closed | 59 |
| P0302 | Cylinder 2 Misfire Detected | 33 |
| P1450 | Unable To Bleed Up Fuel Tank Vacuum | 29 |
| U3000 | Control Module | 24 |
| P0301 | Cylinder 1 Misfire Detected | 22 |
| P0303 | Cylinder 3 Misfire Detected | 20 |
| P1299 | Cylinder Head Overtemperature Protection Active | 19 |
| P0304 | Cylinder 4 Misfire Detected | 17 |
| P0300 | Random/Multiple Cylinder Misfire Detected | 17 |
| P0316 | Engine Misfire Detected on Startup (First 1000 Revolutions) | 17 |
| P2119 | Throttle Actuator A Control Throttle Body Range/Performance | 10 |
| P0456 | EVAP System Leak Detected (very small leak) | 9 |
| P0217 | Engine Coolant Over Temperature Condition | 7 |
| P2104 | Throttle Actuator Control System - Forced Idle | 5 |
| P0087 | Fuel Rail/System Pressure - Too Low Bank 1 | 4 |
| P0455 | EVAP System Leak Detected - Large Leak | 4 |
| P0457 | EVAP System Leak Detected (fuel cap loose/off) | 4 |
| P0741 | Torque Converter Clutch Circuit Performance/Stuck Off | 3 |
| P0607 | Control Module Performance | 3 |
| U3003 | Battery Voltage | 3 |
| B1342 | ECU Is Defective | 3 |
| P2196 | O2 Sensor Signal Biased/Stuck Rich Bank 1 Sensor 1 | 3 |
| U0415 | Invalid Data Received From Anti-Lock Brake System (ABS) Control Module | 3 |
| C0022 | Brake Booster Solenoid | 3 |
| B0020 | Left Side Airbag Deployment Control | 2 |
| P2110 | Throttle Actuator A Control System - Forced Limited RPM | 2 |
| U0420 | Invalid Data Received From Power Steering Control Module A | 2 |
| P0131 | O2 Sensor Circuit Low Voltage Bank 1 Sensor 1 | 2 |
Report counts based on NHTSA owner complaints. Codes are linked to the generic DTC code page for more information.
Got a Code on Your FORD FUSION?
-
1
Find your code above
Click the code to see detailed data for your specific FORD FUSION, including real owner reports.
-
2
Check for recalls
Enter your VIN at nhtsa.gov/recalls to check for free recall repairs.
-
3
Get diagnosed
A code is a starting point, not a final answer. Get a proper diagnosis before replacing parts.