Bosch Washing Machine ⚠️ Stop Using

Bosch Washing Machine Error Code E02

Bosch Washing Machine error code E02: Motor brushes worn (older models).

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Bosch washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Bosch Owner Support - Washer and dryer troubleshooting — Official Bosch owner-support entry point for washer and dryer troubleshooting and manuals.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Caution — continued use without airflow causes overheating. Turn off until repaired.

Can I fix it myself?

Technician Recommended

Part: Fan motor / run capacitor

How much will it cost?

DIY: $30–$200 (motor or capacitor)

Technician: $150–$500

⏱ 45–90 min

What Does Error E02 Mean on Your Bosch Washing Machine?

Bosch Washing Machine error code E02: Motor brushes worn (older models).

What typically fails: Fan motor / run capacitor

What You're Probably Seeing

→ Drum not spinning
→ Loud noise during spin
→ Machine vibrating excessively

Common Causes

• Door not fully latched or load preventing closure
• Door lock switch not reporting closed
• Latch, strike, or wiring fault in the door-lock circuit

What to Try First

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
3 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set, Capacitor tester · Time: 45–90 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Bosch Washing Machine error code E02 mean? ▼

Error code E02 on a Bosch Washing Machine means: Motor brushes worn (older models). The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Bosch Washing Machine error code E02? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error E02 returns, the root cause (motor brushes worn (older models)) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Bosch Washing Machine with error code E02? ▼

It depends on the cause. Most E02 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Bosch Washing Machine Codes

All Bosch washing machine error codes → All Bosch appliance codes →