Bosch Washing Machine ⛔ Unplug Now

Bosch Washing Machine Error Code E13

Bosch Washing Machine error code E13: Water leak detected in base.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Bosch washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Bosch Owner Support - Washer and dryer troubleshooting — Official Bosch owner-support entry point for washer and dryer troubleshooting and manuals.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⛔ Yes — unplug now

Stop using immediately — water and electricity are dangerous. Unplug before inspecting.

Can I fix it myself?

Technician Recommended

Part: Door seal / inlet hose / drain hose / pump

How much will it cost?

DIY: $50–$200 (if hose/seal)

Technician: $150–$500

⏱ 30–120 min

What Does Error E13 Mean on Your Bosch Washing Machine?

Bosch Washing Machine error code E13: Water leak detected in base.

What typically fails: Door seal / inlet hose / drain hose / pump

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Water supply valve closed or restricted
• Inlet hose screen clogged by sediment
• Failed inlet valve or low household water pressure

What to Try First

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Screwdriver set, Towels, Flashlight · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Bosch Washing Machine error code E13 mean? ▼

Error code E13 on a Bosch Washing Machine means: Water leak detected in base. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Bosch Washing Machine error code E13? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error E13 returns, the root cause (water leak detected in base) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Bosch Washing Machine with error code E13? ▼

It depends on the cause. Most E13 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Bosch Washing Machine Codes

All Bosch washing machine error codes → All Bosch appliance codes →