Frigidaire Washing Machine ✅ Safe for Now

Frigidaire Washing Machine Error Code E24

Frigidaire washer error code E24: Drain pump relay failure.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Frigidaire washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Frigidaire Owner Center - Washer support — Official Frigidaire owner support entry point used to confirm washer support and troubleshooting guidance.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe to leave off. Fix soon — water backup can cause mold or floor damage.

Can I fix it myself?

DIY Possible

Part: Drain pump / drain hose / filter

How much will it cost?

DIY: $0–$150 (pump or hose)

Technician: $100–$300

⏱ 20–45 min

What Does Error E24 Mean on Your Frigidaire Washing Machine?

Frigidaire washer error code E24: Drain pump relay failure.

What typically fails: Drain pump / drain hose / filter

What You're Probably Seeing

→ Water left in drum after cycle
→ Machine stops during spin
→ Wet clothes after full cycle

Common Causes

• Drain hose kinked, blocked, or installed too high
• Pump filter or drain path clogged with lint or debris
• Failed drain pump or loose drain-pump wiring

How to Fix It Yourself

1 Cancel the cycle and drain the tub safely before opening the filter area
2 Clean the pump filter and make sure the drain hose is not kinked or packed with lint
3 Verify the standpipe is clear and the hose is not pushed too far down
4 If the drain path is clear but the pump never gets power, leave the washer unplugged and schedule control-board service
5 Avoid bypassing the drain pump relay to force the washer to run

🛠️ You'll need: Screwdriver set, Bucket, Wet/dry vacuum · Time: 20–45 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Frigidaire Washing Machine error code E24 mean? ▼

Error code E24 on a Frigidaire Washing Machine means: Drain pump relay failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Frigidaire Washing Machine error code E24? ▼

Start by clearing the filter, hose, and standpipe because those issues can mimic a relay fault. If the drain path is clear but the pump still does not run, the relay or control board needs service.

Is it safe to use my Frigidaire Washing Machine with error code E24? ▼

Leave the washer off until it can drain normally. Water left in the tub can overflow or keep the door locked.

More Frigidaire Washing Machine Codes

All Frigidaire washing machine error codes → All Frigidaire appliance codes →