Samsung Dishwasher ✅ Safe for Now

Samsung Dishwasher Error Code UC

Samsung Dishwasher error code UC: Unbalanced — racks incorrectly loaded (specific models).

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against official Samsung dishwasher support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Dishwasher error codes and troubleshooting — Official Samsung support guidance for dishwasher error codes, drain, fill, leak, sensor, and heater troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe — the machine stopped to prevent damage. Redistribute the load and restart.

Can I fix it myself?

DIY — Redistribute Load

Part: Load distribution (not a part failure)

How much will it cost?

DIY: $0

Technician: N/A

⏱ 2 min

What Does Error UC Mean on Your Samsung Dishwasher?

Samsung Dishwasher error code UC: Unbalanced — racks incorrectly loaded (specific models).

What typically fails: Load distribution (not a part failure)

What You're Probably Seeing

→ Error code on display
→ Cycle not completing
→ Machine stopping unexpectedly

Common Causes

• Door latch not fully engaging before cycle start
• Latch switch or strike misalignment
• Loose latch wiring or failed door-switch circuit

How to Fix It Yourself

1 Unplug the dishwasher for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 If the error persists after basic troubleshooting, contact a qualified appliance technician

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Dishwasher error code UC mean? ▼

Error code UC on a Samsung Dishwasher means: Unbalanced — racks incorrectly loaded (specific models). The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Dishwasher error code UC? ▼

First, unplug the dishwasher for 60 seconds to reset the control board. If error UC returns, the root cause (unbalanced — racks incorrectly loaded (specific models)) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Dishwasher with error code UC? ▼

It depends on the cause. Most UC errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Dishwasher Codes

All Samsung dishwasher error codes → All Samsung appliance codes →