Samsung Washing Machine ⚠️ Stop Using

Samsung Washing Machine Error Code E2

Samsung Washing Machine error code E2: Clutch drum error.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against Samsung washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Washer error codes and troubleshooting — Official Samsung support guidance for washer error codes, water supply, drain, door, balance, and sensor troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⚠️ Stop using it

Stop using until the cause is identified. Check your owner's manual for model-specific guidance.

Can I fix it myself?

Technician Recommended

Part: See description above

How much will it cost?

DIY: Varies

Technician: $100–$500

⏱ 30–120 min

What Does Error E2 Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code E2: Clutch drum error.

What typically fails: See description above

What You're Probably Seeing

→ Drum not spinning
→ Loud noise during spin
→ Machine vibrating excessively

Common Causes

• Drain timeout or water not leaving the tub fast enough
• Blocked pump filter, kinked drain hose, or restricted standpipe
• Drain pump or pressure-sensing issue

What to Try First

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check the drive belt — if broken or slipping, replace it ($10–$30 part)
3 Test the motor with a multimeter — a technician should replace it if failed ($150–$400)
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code E2 mean? ▼

Error code E2 on a Samsung Washing Machine means: Clutch drum error. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Washing Machine error code E2? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error E2 returns, the root cause (clutch drum error) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Washing Machine with error code E2? ▼

It depends on the cause. Most E2 errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →