Samsung Washing Machine ✅ Safe for Now

Samsung Washing Machine Error Code HC

Samsung Washing Machine error code HC: Heater failure.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against Samsung washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Washer error codes and troubleshooting — Official Samsung support guidance for washer error codes, water supply, drain, door, balance, and sensor troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe to use on cold settings temporarily. Heating element failure is a common DIY repair.

Can I fix it myself?

DIY Possible

Part: Heating element / thermal fuse / thermistor

How much will it cost?

DIY: $20–$100 (element or thermistor)

Technician: $100–$300

⏱ 30–60 min

What Does Error HC Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code HC: Heater failure.

What typically fails: Heating element / thermal fuse / thermistor

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Heater circuit reading out of range
• Washer temperature sensor or heater relay fault
• Wiring issue in the heater/thermistor circuit

What to Try First

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Test the heating element with a multimeter — replace if no continuity ($20–$80 part)
3 Check the thermal fuse — a blown fuse means there was overheating, also check the vent
4 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set, Nut driver · Time: 30–60 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code HC mean? ▼

Error code HC on a Samsung Washing Machine means: Heater failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Washing Machine error code HC? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error HC returns, the root cause (heater failure) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Washing Machine with error code HC? ▼

It depends on the cause. Most HC errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →