Samsung Washing Machine ⛔ Unplug Now

Samsung Washing Machine Error Code LE

Samsung Washing Machine error code LE: Water leakage detected.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against Samsung washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Washer error codes and troubleshooting — Official Samsung support guidance for washer error codes, water supply, drain, door, balance, and sensor troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

⛔ Yes — unplug now

Stop using immediately — water and electricity are dangerous. Unplug before inspecting.

Can I fix it myself?

Technician Recommended

Part: Door seal / inlet hose / drain hose / pump

How much will it cost?

DIY: $50–$200 (if hose/seal)

Technician: $150–$500

⏱ 30–120 min

What Does Error LE Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code LE: Water leakage detected.

What typically fails: Door seal / inlet hose / drain hose / pump

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Leak or low water level detected while running
• Loose hose, door boot, tub, or dispenser leak
• Pressure sensor or water-level hose fault

What to Try First

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Screwdriver set, Towels, Flashlight · Time: 30–120 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code LE mean? ▼

Error code LE on a Samsung Washing Machine means: Water leakage detected. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Washing Machine error code LE? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error LE returns, the root cause (water leakage detected) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Washing Machine with error code LE? ▼

It depends on the cause. Most LE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →