Samsung Washing Machine ✅ Safe for Now

Samsung Washing Machine Error Code nF

Samsung Washing Machine error code nF: Water not filling.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against Samsung washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Washer error codes and troubleshooting — Official Samsung support guidance for washer error codes, water supply, drain, door, balance, and sensor troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe — unit stops when it can't fill. Check the supply hose and valve before calling a technician.

Can I fix it myself?

DIY Possible

Part: Water inlet valve / supply hose

How much will it cost?

DIY: $15–$80 (inlet valve)

Technician: $100–$250

⏱ 20–40 min

What Does Error nF Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code nF: Water not filling.

What typically fails: Water inlet valve / supply hose

What You're Probably Seeing

→ Washer not filling with water
→ Long fill time
→ Machine stops mid-cycle

Common Causes

• Washer did not fill within expected time
• Closed supply valve, kinked hose, or clogged inlet screen
• Failed inlet valve or low household water pressure

How to Fix It Yourself

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Check that the water supply valve behind the machine is fully open
3 Inspect the inlet hose screen filter — sediment often blocks it (unscrew hose, clean mesh screen)
4 Test the water inlet valve with a multimeter — replace if no continuity ($15–$80 part)
5 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Screwdriver set, Pliers, Multimeter · Time: 20–40 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code nF mean? ▼

Error code nF on a Samsung Washing Machine means: Water not filling. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Washing Machine error code nF? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error nF returns, the root cause (water not filling) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Washing Machine with error code nF? ▼

It depends on the cause. Most nF errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →