Samsung Washing Machine ✅ Safe for Now

Samsung Washing Machine Error Code PC

Samsung Washing Machine error code PC: Pressure sensor error.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against Samsung washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Washer error codes and troubleshooting — Official Samsung support guidance for washer error codes, water supply, drain, door, balance, and sensor troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe to use briefly. A faulty sensor causes poor performance but rarely immediate danger.

Can I fix it myself?

DIY Possible

Part: Temperature sensor / thermistor

How much will it cost?

DIY: $10–$60 (sensor)

Technician: $80–$250

⏱ 20–45 min

What Does Error PC Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code PC: Pressure sensor error.

What typically fails: Temperature sensor / thermistor

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Clutch or position-control feedback issue
• Loose clutch/motor harness connection
• Drive system or control-board fault

How to Fix It Yourself

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Test the sensor with a multimeter — check resistance against the spec in the service manual
3 Inspect the sensor's wiring harness for corrosion or loose connector
4 Replace the sensor if out of spec ($10–$50 part)
5 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set · Time: 20–45 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code PC mean? ▼

Error code PC on a Samsung Washing Machine means: Pressure sensor error. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Washing Machine error code PC? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error PC returns, the root cause (pressure sensor error) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Washing Machine with error code PC? ▼

It depends on the cause. Most PC errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →