Samsung Washing Machine ✅ Safe for Now

Samsung Washing Machine Error Code tE

Samsung Washing Machine error code tE: Temperature sensor failure.

Last reviewed: Aug 7, 2026 Last updated: Aug 7, 2026

Methodology: Reviewed against Samsung washer support guidance, then grouped by fault family before separating owner-safe checks from technician-level diagnosis.

Sources: Manufacturer fault-code sheets, service manuals, and recurring field-repair patterns.

Samsung Support - Washer error codes and troubleshooting — Official Samsung support guidance for washer error codes, water supply, drain, door, balance, and sensor troubleshooting.

Limits: Guidance is informational and may not match every model-year or revision. Confirm with the official manual and diagnostics before replacing parts. For safety-critical or electrical work, use a qualified technician.

Should I unplug it?

✅ No — safe for now

Safe to use briefly. A faulty sensor causes poor performance but rarely immediate danger.

Can I fix it myself?

DIY Possible

Part: Temperature sensor / thermistor

How much will it cost?

DIY: $10–$60 (sensor)

Technician: $80–$250

⏱ 20–45 min

What Does Error tE Mean on Your Samsung Washing Machine?

Samsung Washing Machine error code tE: Temperature sensor failure.

What typically fails: Temperature sensor / thermistor

What You're Probably Seeing

→ Error code displayed
→ Machine stops mid-cycle
→ Cycle won't complete

Common Causes

• Temperature sensor or thermistor fault
• Loose thermistor harness or damaged wiring
• Control board misreading the temperature circuit

How to Fix It Yourself

1 Unplug the washing machine for 60 seconds then plug back in — this resets the control board and clears many temporary faults
2 Test the sensor with a multimeter — check resistance against the spec in the service manual
3 Inspect the sensor's wiring harness for corrosion or loose connector
4 Replace the sensor if out of spec ($10–$50 part)
5 If the error persists after basic troubleshooting, contact a qualified appliance technician

🛠️ You'll need: Multimeter, Screwdriver set · Time: 20–45 min

💡 Try this first: Unplug the appliance for 60 seconds, then plug back in. This resets the control board and clears many temporary faults.

Questions People Also Ask

What does Samsung Washing Machine error code tE mean? ▼

Error code tE on a Samsung Washing Machine means: Temperature sensor failure. The appliance detected this condition and has stopped or limited operation to prevent further damage.

How do I fix Samsung Washing Machine error code tE? ▼

First, unplug the washing machine for 60 seconds to reset the control board. If error tE returns, the root cause (temperature sensor failure) needs to be addressed — check connections, filters, and hoses before calling a technician.

Is it safe to use my Samsung Washing Machine with error code tE? ▼

It depends on the cause. Most tE errors mean the appliance has stopped itself as a safety measure. Check the 'Should I unplug it?' section above for specific guidance on this error.

More Samsung Washing Machine Codes

All Samsung washing machine error codes → All Samsung appliance codes →